Tube
Multi-colored Ribbon Tubing
Easy for tracing and identifying the piping, suitable for piping of double-acting actuators and multiple actuators.
Available in combinations of 10 colors and 6 sizes.
Bending radius
-
10Color
Advantages
Eliminate tangling issues and enable easy tracing and troubleshooting
Flexible and it is easy tracing and identifying the piping
Flexible polyurethane (UB)
For the black 2 core tube, the discernment line is printed on one tubing
It helps to prevent a piping mistake.
Cutting marks are printed at approximately 500mm intervals
It is useful to cut tubing. The mark is just as a guide and the accuracy is not guaranteed.
As built-to-order production, No. of cores, configuration and color are freely arranged
No. of cores: 3-6 cores. Configuration: Ribbon or pyramid. Color: combination of 10 colors.
Specifications
| Fluid medium | Air, Water (Conditional *1) |
|---|---|
| Max. operating pressure (65%RH at 20ºC) | 0.8MPa *2 |
| Max. vacuum | -100kPa |
| Operating temperature range | -15～60ºC (No freezing) |
Warning
*1. Adhere to the following conditions in case the fluid media is water.
Surge pressure must be controlled lower than max. operating pressure when using water as a fluid medium.
Tap water in Japan, which is soft water (low mineral content) can be used. Carry out the evaluation under an actual operating condition for using other kind of water.
Be sure to place Insert Ring (WR) into the tubing end when the tubing is inserted into Push-in Fitting with water as a fluid medium.
*2. The value of max. operating pressure is measured at 20ºC at 65%RH. When the tubing is used in different conditions, consider a safety ratio of the pressure with an enough margin, referring to Burst Pressure Curve. When the tubing is frequently swung and bent, there is a possibility of generating heat between molecules, and damaging the product.
Port size
Metric size
| O.D.xI.D.(φmm) | 3x2, 4x2.5, 6x4, 8x5, 10x6.5, 12x8 |
|---|
Ordering Information
Detailed Safety Instructions
Caution
1.If there is some difficulty in peeling off the bonded tubings individually, cut a slit on the bonded part with a cutter around 1/4" from the tubing end and peel them off
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.
