Control Valve
Orifice Fittings (Tamper-Proof)
Push-in fitting type fixed orifice joint. It controls air flow.
Advantages
Push-in fitting type fixed orifice joint. It controls air flow.
Orifice bore:Selectable from φ0.1mm to φ2.0mm in increment of 0.1mm.
Can be installed in tight space.
M5x0.8 thread is introduced in mini type fitting that makes compact piping possible.
Low cost compared to needle valve
Specifications
Fluid medium | Air |
---|---|
Max. operating pressure | 1.0MPa |
Max. vacuum | -100kPa |
Operating temperature range | 0~60℃ (No freezing) |
Port size
Tube dia.
mm size(mm) | φ4, φ6, φ8 |
---|---|
inch size | φ5/32, φ1/4 |
Thread size
Metric male thread | M5x0.8 |
---|---|
Taper pipe male thread | R1/8 |
UNF Thread | 10-32UNF |
NPT Thread | NPT1/8 |
Flow Characteristic Graph
Type & Price list
Detailed Safety Instructions
Caution
1.Before using the product, be sure to check the orifice bore size marked on the outer hexagonal column. Note that different orifice diameters will result in different flow rate.
2.Even with the same orifice diameter, the flow rate varies piece-to-piece, so for flow control where accuracy is required, measure with actual operation and use the best available orifice.
3.Note that no plating is treated for the inside orifice bore of ø0.1 mm and ø0.2 mm.
Inquiries about this product
It is also possible to suggest products suitable for various conditions such as applications and functions. Please feel free to contact us or visit the nearest sales office.
The following are frequently asked questions. Please check before making inquiries.